SC48TX Stump Cutter
- Efficient performance across stumps of all sizes
 - Optimal power delivery at the stump
 - Enhanced jobsite flexibility
 
| Manufacturer | Vermeer | 
| Model | SC48TX Stump Cutter | 
| Category | Landscape, Rental, Tree Care | 
| Price | Request a Quote | 
| Year | 2024 | 
| Length | 140in (355.6cm) | 
| Width (tracks retracted) | 35in (88.9cm) | 
| Width (tracks extended) | 49in (124.5cm) | 
| Height (non-remote unit) | 76in (193cm) | 
| Height (remote unit) | 85in (215.9cm) | 
| Weight - Engine Option One | 3750lbs (1701kg) | 
| Sound Power | 107 dB(A) | 
| Make and Model | CAT C1.7 T4F/Stage V | 
| Number of Cylinders | 3 | 
| Gross Horsepower (Maximum) | 48hp (35.8kw) | 
| Torque (Max) | 123ft-lb (166.8Nm) | 
| Fuel Tank Capacity | 14.5gal (54.9L) | 
| Max Fuel Consumption | 2.9gph (11lph) | 
| Fuel Type | Ultra-low sulfur diesel | 
| Air Cleaner | Dry-type, restriction indicator, evacuator valve and safety element | 
| Oil Filter | Spin-on | 
| Recommended Oil | 10W-30 | 
| Oil Volume with Filter | 5.3qt (5L) | 
| Maximum Angle of Continuous Operation | 35deg | 
| Cooling Medium | Water/antifreeze | 
| Coolant Capacity (Engine and Radiator) | 2.9gal (11L) | 
| Alternator | 85A | 
| Fan | 16.5 in | 
| Clutch Type | Electric clutch with brake | 
| Cutterwheel Diameter | 24in (61cm) | 
| Cutterwheel Thickness | 1.4in (3.5cm) | 
| Cutterwheel Speed | 1235rpm | 
| Cutterwheel Straight Line Dimension | 65in (165.1cm) | 
| Cutterwheel Cut Above Ground | 28in (71.1cm) | 
| Cutterwheel Cut Below Ground | 16in (40.6cm) | 
| Tooth Description | Vermeer cutting system | 
| Number of Teeth | 27 | 
| Number of wear plates | 6 | 
| Reversible Pockets/Teeth | 24 | 
| Cutterwheel Guard | Standard | 
| Chip Containment | 23cu ft (.7cu m) | 
| Lower Gearbox | Straight bevel | 
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil | 
| Oil Capacity - Lower Gearbox | 1.6qt (1.5L) | 
| Driveshaft | 2 universal joints | 
| Driveshaft - U Joints | 2 standard with double lip seal | 
| Tank capacity | 9gal (34.1L) | 
| Recommended Oil Type | Vermeer highpower 68 | 
| System Type | Tandem gear pump, pressure balanced | 
| Filtration Method | Full-flow 4-micron return filter, suction strainer | 
| Pump Flow at Maximum RPM | 11gpm (41.6L/min) | 
| System relief pressure | 2900psi (199.9bar) | 
| Directional Control | Yes | 
| Oil Cooler | Yes | 
| System Voltage | 12 | 
| Battery | 950 CCA | 
| Warning Lights | Engine warning | 
| Switches | Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range and throttle, blade | 
| Controller | Danfoss | 
| Display | Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status | 
| Shutdown System | High engine temperature and low oil pressure | 
| Radio Remote Control | Optional, wireless | 
| Frame Description | Welded tube and plate steel | 
| Control Station Description | Swing out | 
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate | 
| Brake Type | Spring-applied and hydraulically-released dual parking brakes | 
| Track Type | Rubber 7-in width | 
| Track Length on Ground | 47 in (119.4 cm) | 
| Type of Idler | Cast | 
| Number of Idlers | 7 | 
| Track Drive Pump Type | Tandem gear pump, pressure balanced | 
| System Relief Pressure | 2900 psi | 
| High Speed Travel | 1.5mph (2.4km/h) | 
| Low Speed Travel | 1.1mph (1.8km/h) | 
| Ground Bearing Pressure - Soft Ground | 5.7psi (39.2kPa) | 
| Low Speed Travel | 100ft/min (30.5m/min) | 
| High Speed Travel | 140ft/min (42.7m/min) | 
| Chip blade width (without extensions) | 34in (86.4cm) | 
| Blade Travel Above Ground | 8.5in (21.6cm) | 
| Radio Remote Control | Optional | 
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode and track speed range | 
| Remote Display | LCD with remote control and machine functions status | 
| Remote Range | 300 ft (91.4 m) | 
| Special Paint | Optional | 
| Extended Warranty | Optional | 
| Preventive Maintenance | Optional |